Concrete Screw Anchor
Concrete Screw Anchor
Rod Hanger with external thread
■ Material
Carbon Steel / Alloy Steel ; A2 Stainless Steel ; A4 Stainless Steel
■ Surface Finish
Zinc Plated ; Ruspert ; Mechanical Zinc Plated
■ Product Description
Rod Hanger with external thread concrete screw anchor — features a fully threaded external shaft that accepts standard nuts for mounting fixtures, brackets or other hardware. External thread design provides flexible attachment options where the screw itself acts as the anchoring element with nut-and-washer assembly.
✔︎ Concrete ✔︎ Block ✔︎ Natural Stone
01 . Full External Thread ： accepts standard nuts anywhere along the threaded shaft for adjustable clamping
02 . Flexible Fixture Attachment ： nut and washer assembly for custom configurations
03 . Self-Tapping Thread ： creates direct mechanical interlock in concrete without expansion
04 . Removable & Reusable ： no residual material left after removal
05 . Multiple Corrosion-Coated Options Available✔︎ Bracket and Support Arm Mounting ✔︎ Pipe and Conduit Clamping ✔︎ Signage Systems ✔︎ Temporary Structural Anchors
Step 1 - Drill
Use a hammer drill (SDS-plus) with the specified drill bit diameter. Drill to the required depth per the anchor size table for your selected diameter.
Step 2 - Clean
Remove all dust and debris from the hole using a blow-out pump followed by a hole brush.
Step 3 - Insert
Insert the concrete screw anchor through the fixture into the drilled hole.
Step 4 - ATTACH
Thread your fixture onto the external thread and tighten the locknut to the required torque.
Step 5 - VERIFY
Check that the anchor is secure and the fixture is held firmly in position.