Concrete Screw Anchor
Concrete Screw Anchor
Hexagon Head
■ Material
Carbon Steel / Alloy Steel ; A2 Stainless Steel ; A4 Stainless Steel
■ Surface Finish
Zinc Plated ; Ruspert ; Mechanical Zinc Plated
■ Product Description
Hexagon Head concrete screw anchor with standard hex head design without flange, providing a firm grip for wrench or socket drive installation. Suitable for heavy-duty structural anchoring where maximum torque transfer and a reliable mechanical connection are required.
✔︎ Concrete ✔︎ Block ✔︎ Natural Stone
01 . Standard Hex Head ： compatible with standard wrenches and sockets for maximum torque
02 . Standard Thread Profile ： reliable anchoring for general-purpose applications
03 . Thru-Hole Installation ： washer and nut can be used for additional clamping
04 . Removable & Reusable ： leaves no residual metal in base material
05 . Cold-Forged Construction ： high tensile strength and consistent performance✔︎ Steel Frame Construction ✔︎ Rebar Anchoring ✔︎ Machinery Bases ✔︎ Pipeline and Cable Brackets ✔︎ Industrial Racking Systems
Step 1 - Drill
Use a hammer drill (SDS-plus) with the specified drill bit diameter. Drill to the required depth per the anchor size table for your selected diameter.
Step 2 - Clean
Remove all dust and debris from the hole using a blow-out pump followed by a hole brush. Dust remaining in the hole will significantly reduce holding values.
Step 3 - Insert
Pass the anchor through the fixture and insert the screw directly into the hole until it reaches the bottom of the drilled hole.
Step 4 - Drive
Drive the screw with an impact wrench or torque wrench.
Do NOT exceed the maximum installation torque specified in the technical data table for your anchor diameter.
Step 5 - Set
Installation is complete when the hex head contacts the washer and fixture surface.